Average Reviews:
(More customer reviews)After many emails and phone calls Andy came through got a replacement took a long time but he is a man of his word . This is with Kisan not this vendor
Click Here to see more reviews about: VectraLight Motorcycle License Plate Frame - LPB-16 - Black
Product Description:
3 in 1 Feature! 1) Sequential Turn Signal Right and Left LED arrays indicate sequential turn signals. These superbright LEDs (8500 mCd) have a wide viewing angle of 180 degrees. They are sunlight readable, even from the adjacent lanes. 2) Brake Light Flasher A cluster of (6) LEDs is magnified by an acrylic lens to broadcast the Deceleration Warning sequence. As soon as you tap the brakes, they modulate rapidly at first then slow down to a solid ON over a period of (4) seconds. 3) Running Lights This is a programmable feature. For additional visibility, all LEDs stay ON at reduced intensity, but you can also turn this feature Off. All electronics are encased in a scratch resistant polycarbonate housing and sealed for weather protection. All electronics are encased in a scratch resistant polycarbonate housing and sealed for weather protection. Alloy License Plate Holder The frame is die cast alloy for strength and durability. Powder coated in Black polyurethane with "Wrinkled finish" to match non-chrome European trim. Designed to accept the most commonly used 7-1/2" license plates. Draws very little current (3/10th of an AMP), so it does not interfere with integrated ABS or EVO brake systems. Requires connecting to the turn signal and brake wires. You do not have to cut any wires, if you use the Scotchlok (T-Tap) connectors, which are also supplied. VectraLight LPB-16 can be mounted with the LED arrays on top or bottom of the license plate.
Get 10% OFF
Want to buy VectraLight Motorcycle License Plate Frame - LPB-16 - Black at other amazon sites? Click the corresponding icon below:
0 comments:
Post a Comment